0E-COMSMOKE
4-Wire Conventional Photoelectric Smoke Detector
Photoelectric Smoke Detector
4-Wire Conventional Photoelectric Smoke Detector
0E-COMSMOKE
Key features
Photoelectric Smoke Detector
• For Conventional 4 wire applications, compatible with any UL listed 4 Wire Fire Alarm Panel
• Wide-angle, dual red LEDs
• Low standby current
• Form A relay output
• Plug in detector line
• Mounting base included
• 12/24VDC
Overview
The 0E-COMSMOKE is 4-wire conventional photoelectric smoke detector with mounting base. This detector is designed to provide open area protection and to be used with compatible UL listed 4 Wire Fire Alarm Control panels only. Two LEDs on each detector provide local 360° visible alarm indication. LEDs flash every five seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption. The plug in detector base is intended for use in 4-wire systems, with screw terminals provided for power and relay output connections.
Technical specifications
• Diameter: 4.04 inches (102 mm) installed in detector base
• Height: 2.11 inches (54 mm) installed in 0E-COMSMOKEB Base
• Weight: 4.24 oz. (120 g) installed in detector base
• Operating Temperature Range: 32~120°F (0~49°C)
• Operating Humidity Range: 10%~93% Relative Humidity non-condensing
• Operating voltage: 8.5~35VDC
• Standby Current: 90μA average
• Alarm Current: 36mA @ 24VDC
• Alarm Contact Ratings: 0.5 Amp @ 30 V AC/DC
• Latching Alarm: Reset by momentary power interruption
• Alarm Reset Time: 0.3 sec
• Product Certification: UL Listed S35851 fire alarm subassembly